NYLON PLASTIC PEDALS

These great quality pedals made from injection molded nylon are a lot lighter then aluminium pedals.

Nylon pedals

These great quality pedals made from injection molded nylon are a lot lighter then aluminium pedals. A 22mm low profile, high quality ball bearings and a grippy platform is all you will need. Small knurlings on the whole contact surface & bigger size pins improve pedal grip. The axle is hardened and comes with a 15mm wrench slot and 6mm socket. The pedals will last for a long time if not used for grinding. Remember that ‘plastic’ is not as good for grinding or hard impacts as aluminium. However you may use these pedals for grinding on completely different surfaces like aluminium, wood etc. If you are a hardcore rider use them hard and replace them if needed, they are cheap!

MAIN FEATURES

-material: injection molded transparent Polycarbonate
-ball bearings
-12 big pins on each side
-platform: 97mm x 92mm
-thickness: 22mm
-15 mm flat wrench slot + 6mm Allen hex socket
-axle thread size: standard 9/16″
-weight: only ~355g!

Check also