A premium MTB singlespeed hub with a 10t driver and wide flanges for great wheel strength. It runs on four high quality sealed bearings. We use a 10t driver that fit’s big strong bearings inside so everything runs smoothly without any bearing problems. The steel axle is cut flush with the nuts for a clean look and for safety reasons. Steel nuts give extra strength and clamping force for securing your wheel in horizontal dropouts. For weight reduction the cones have been made from aluminium. The looks are just as good as the function with black hardware and an anodized finish. Disc brake compatible. Hubs are offered in 32h version only and in a choice of four colors included new limited edition oil slick version.
material: AL6061-T6 body, AL7075-T6 axle and cones, steel bolts
female oversize axle system + side bolts – this solution rules as it’s light & strong!
4 x #6902 sealed bearings (2x main hub bearings, 2x inside driver)
bolts compatible with 10mm dropouts: 17mm hex head and 6mm Allen hex sockets, 3/8”x24tpi thread
hollow AL7075-T6 axle
10T driver with two decent sized, strong sealed bearings
3 pawls with 30 engagement points / each 12°
disc brake mount IS (International Standard / 6-bolts)
available in 32h version only
weight: 465 grams